EPS输入方式可分为单相220V和三相380V
上海邑美EPS应急电源规格很多，按客户的需要输入方式可分为单相220V和三相380V;按输出方式可分为单相、三相及单、三相混合输出;安装形式有落地式、壁挂式和嵌墙式三种;容量有从0.5kW到800kW各个级别;按服务对象可分为动力负载和应急照明两种;其备用时间一般有90～120分钟，如有特殊要求还可按设计要求配置备用时间。因此EPS应急电源能满足我们一般工程中的需要。
EPS emergency power supply specifications are many, according to the input can be divided into single-phase 220V and three-phase 380V; press output can be divided into single-phase, three-phase and single-phase mixed output; installed in the form of floor, wall and in-wall type three; capacities from 0.5kW to 800kW with all levels; press service object can be divided into two kinds of dynamic loads and emergency lighting; its standby time is generally 90 to 120 minutes, any special requirements can be configured according to the design requirements of standby time . So EPS emergency power to meet the needs of our general engineering.
EPS emergency power supply specifications are many, according to the input can be divided into single-phase 220V and three-phase 380V; press output can be divided into single-phase, three-phase and single-phase mixed output; installed in the form of floor, wall and in-wall type three; capacities from 0.5kW to 800kW with all levels; press service object can be divided into two kinds of dynamic loads and emergency lighting; its standby time is generally 90 to 120 minutes, any special requirements can be configured according to the design requirements of standby time . So EPS emergency power to meet the needs of our general engineering.
推荐新闻
A型应急照明集中电源操作？
一、送电开机
1. 先检查：接线、电池正负极、接地、所有回路无短路，灯…
关注我们
