EPS消防应急电源 输出方式可分为单相、三相及单、三相混合输出
应急电源柜 EPS应急电源规格很多，可满足客户多方面的需求。按输入方式可分为单相220V和三相380V;按输出方式可分为单相、三相及单、三相混合输出;安装形式有落地式、壁挂式和嵌墙式三种;容量有从0.5kW到800kW各个级别;按服务对象可分为动力负载和应急照明两种;其备用时间一般有90～120分钟，如有特殊要求还可按设计要求配置备用时间。因此EPS应急电源能满足我们一般工程中的需要。
EPS emergency power supply specifications are many, according to the input can be divided into single-phase 220V and three-phase 380V; press output can be divided into single-phase, three-phase and single-phase mixed output; installed in the form of floor, wall and in-wall type three; capacities from 0.5kW to 800kW with all levels; press service object can be divided into two kinds of dynamic loads and emergency lighting; its standby time is generally 90 to 120 minutes, any special requirements can be configured according to the design requirements of standby time . So EPS emergency power to meet the needs of our general engineering.
EPS emergency power supply specifications are many, according to the input can be divided into single-phase 220V and three-phase 380V; press output can be divided into single-phase, three-phase and single-phase mixed output; installed in the form of floor, wall and in-wall type three; capacities from 0.5kW to 800kW with all levels; press service object can be divided into two kinds of dynamic loads and emergency lighting; its standby time is generally 90 to 120 minutes, any special requirements can be configured according to the design requirements of standby time . So EPS emergency power to meet the needs of our general engineering.
下一个:
推荐新闻
消防智能数字巡检装置-巡检柜厂家该设备具有主回路巡检及消防设备无压巡检两部分组成，可完成对主控回路及水泵…
关注我们
